With their innovative WLS (wet-laid/spunlace) technology, Voith and Trützschler ensure flexible and efficient production of wet-laid and hydro-entangled nonwovens from 100 percent cellulose at Albaad’s new WLM1 production line. The client for the project in Dimona, Israel, is Albaad, one of the three largest manufacturers of wet wipes and feminine hygiene products in the world. Already in the first phase after start-up, the WLM1 completely met Albaad’s expectations: the nonwovens manufactured at a speed of over 200 meters per minute exhibited an extremely high product quality.
Accordingly, Gadi Choresh, plant manager of Albaad in Dimona, is satisfied with the work by Voith and Trützschler: “The installation and start-up of the machine went very well. With their professionalism and high level of commitment, the team has ensured the success of the project. Albaad appreciates the long term commitment and support to achieve the line properties even when things were not as expected”.
● Production of nonwovens from renewable cellulose and from 100% biodegradable products.
● Consistent sheet formation for high-quality end products.
Voith and Trützschler machines for optimum quality
For the wet-in-wet production of its nonwovens, Albaad uses exclusively fibers from cellulose. In the first step, web formation, a suspension highly diluted with water is produced and fed into the Voith HydroFormer. A homogeneous fiber mat forms on the inclined wire of the machine. In many respects, this process is similar to the manufacturing process of paper. Voith has carried its extensive competence in paper machines over into the HydroFormer concept and thus makes it possible to produce high-quality nonwovens in this segment too.
Voith and Trützschler Nonwovens collaborated once again to implement the project. Trützschler was largely responsible for the machines for web bonding and drying. The AquaJet technology is leading the world in the bonding of nonwovens. Directed high-pressure water jets interweave the individual fibers together solely through the momentum of the water.
The material thus obtains a high tensile strength and the desired textile feel without the use of any binding agents or bi-component fibers. In Albaad’s WLS plant, Trützschler’s innovative high-performance Streamliner dryer carries out the bulk of the drying of the nonwoven material. The spiral dryer section significantly increases the air speed and thereby achieves optimal drying performance.
With the second drying step comes another component of the system by Voith, the contactless MCB drying system. Its uniform and stable web run ensures the efficient residual drying of the nonwoven material. Moreover, Voith has equipped the WLM1 with a comprehensive process and quality control system. It monitors all the relevant parameters of production and thus reliably ensures a high product quality.
As a system vendor we aim to support our customers throughout the entire value creation process
Simple manufacturing of 100% biodegradable, flushable wipes
The renewable raw material cellulose is very cost-effective and allows the manufacture of high-quality nonwovens with different characteristics. One special product segment is flushable wipes, which disintegrate very quickly in moving water but at the same time have a high strength when wet. Furthermore, these products are completely biodegradable. The hygiene products produced on the WLM1 are therefore perfect as moist toilet paper and can simply be flushed down the toilet. They thus make an important contribution to reducing blockages and faults in our waste water systems.
Cellulose-based hygiene products are considerably more environmentally-friendly than those made from oil-based raw materials and ensure that our seas become less polluted with plastic waste. The second raw material needed for production, water, is also used in an environmentally-compatible manner through the wet-in-wet technology. In a circuit, a filter system treats the white water from the HydroFormer and AquaJet and returns it to the manufacturing process.
J.M. Voith SE & Co. KG
Voith Paper is part of the Voith Group. As the full-line supplier to the paper industry, it provides the largest range of technologies, services, and products on the market, and offers paper manufacturers integrated solutions from a single source. The company’s continuous stream of innovations facilitates resource-conserving production and helps customers minimize their carbon footprint. With its comprehensive automation products and leading digitalization solutions from the Papermaking 4.0 portfolio, Voith offers its customers state-of-the-art digital technologies to improve plant availability and efficiency for all sections of the production process.
With their innovative WLS (wet-laid/spunlace) technology, Voith and Trützschler ensure flexible and efficient production of wet-laid and hydro-entangled nonwovens from 100 percent cellulose at Albaad’s new WLM1 production line. The client for the project in Dimona, Israel, is Albaad, one of the three largest manufacturers of wet wipes and feminine hygiene products in the world. Already in the first phase after start-up, the WLM1 completely met Albaad’s expectations: the nonwovens manufactured at a speed of over 200 meters per minute exhibited an extremely high product quality.
Accordingly, Gadi Choresh, plant manager of Albaad in Dimona, is satisfied with the work by Voith and Trützschler: “The installation and start-up of the machine went very well. With their professionalism and high level of commitment, the team has ensured the success of the project. Albaad appreciates the long term commitment and support to achieve the line properties even when things were not as expected”.
● Production of nonwovens from renewable cellulose and from 100% biodegradable products.
● Consistent sheet formation for high-quality end products.
Voith and Trützschler machines for optimum quality
For the wet-in-wet production of its nonwovens, Albaad uses exclusively fibers from cellulose. In the first step, web formation, a suspension highly diluted with water is produced and fed into the Voith HydroFormer. A homogeneous fiber mat forms on the inclined wire of the machine. In many respects, this process is similar to the manufacturing process of paper. Voith has carried its extensive competence in paper machines over into the HydroFormer concept and thus makes it possible to produce high-quality nonwovens in this segment too.
Voith and Trützschler Nonwovens collaborated once again to implement the project. Trützschler was largely responsible for the machines for web bonding and drying. The AquaJet technology is leading the world in the bonding of nonwovens. Directed high-pressure water jets interweave the individual fibers together solely through the momentum of the water.
The material thus obtains a high tensile strength and the desired textile feel without the use of any binding agents or bi-component fibers. In Albaad’s WLS plant, Trützschler’s innovative high-performance Streamliner dryer carries out the bulk of the drying of the nonwoven material. The spiral dryer section significantly increases the air speed and thereby achieves optimal drying performance.
With the second drying step comes another component of the system by Voith, the contactless MCB drying system. Its uniform and stable web run ensures the efficient residual drying of the nonwoven material. Moreover, Voith has equipped the WLM1 with a comprehensive process and quality control system. It monitors all the relevant parameters of production and thus reliably ensures a high product quality.
As a system vendor we aim to support our customers throughout the entire value creation process
Simple manufacturing of 100% biodegradable, flushable wipes
The renewable raw material cellulose is very cost-effective and allows the manufacture of high-quality nonwovens with different characteristics. One special product segment is flushable wipes, which disintegrate very quickly in moving water but at the same time have a high strength when wet. Furthermore, these products are completely biodegradable. The hygiene products produced on the WLM1 are therefore perfect as moist toilet paper and can simply be flushed down the toilet. They thus make an important contribution to reducing blockages and faults in our waste water systems.
Cellulose-based hygiene products are considerably more environmentally-friendly than those made from oil-based raw materials and ensure that our seas become less polluted with plastic waste. The second raw material needed for production, water, is also used in an environmentally-compatible manner through the wet-in-wet technology. In a circuit, a filter system treats the white water from the HydroFormer and AquaJet and returns it to the manufacturing process.
Products
Aeration and deaeration plants, Agitator tanks, Air conditioning plants, Air heaters, Automation systems, Blade holders, Calenders, Calenders revamping, Chemical fluid pumps, Chest mixers, Chests, Chilled iron rolls, Chromium plating, Cleaners, Coating kitchens, Coating machines and plants, Coating preparation plants, Consultancy services, Conveying equipments, Conveying screws, Conveyors, Cooling cylinders, Core cutters, Core drums, Couplings all kinds, Creping blades, Creping cylinders, Crush cut systems, Cylinders, Dandy rolls, Deflakers, Deinking systems, Dewatering machines, Dispersing machines, Doctor holding devices, Doctors and doctor blades, Dryers and drying plants, Drying cylinders, Drying hoods, Dye preparation plants, Energy Saving, Exhausters, Fabric guide, Fabric stretcher, Felt conditioning equipments, Felt guide, Felt stretcher, Felts, Fiberizer, Fibre preparation systems, Flow meter, Forming fabrics, Grinding service for drying and creping cylinders, Handling Systems, Headboxes, Heat recovery systems, High density cleaners, Hydrocyclones, Lubrication plants and oils, Mechanical seals, Mixers, Non-woven machines, Packaging systems and machines, Paper conditioning plants, Paper machines, Paper machines revamping, Paper Mills plants, Paperboard machines, Perforated screen plates, Presses, Pressure rolls, Pressurized headboxes, Production lines, Project planning, Pulp presses, Pulp washers, Pulper feeds, Pulpers, Pulpers for paper machines, Reel Cutters, Reel Handling, Reelers, Refiner bars, Refiner disks, Refiner tackles, Refiners, Rewinders, Roll changers, Roll covers, Rolls, Rolls and cylinders grinding machines, Rope guides, Rubber rolls, Screening machines, Screens, Screw presses, Seal Supply Systems, Seals, Shaft management, Shaft pullers, Shafts, Shredder for waste paper, Slat Conveyor Belts, Slitter-winders revamping, Sludge dewatering plants, Spare parts, Spreader cylinders, Steam and condensate systems, Stock preparation systems, Suction press rolls, Suction roll covers, Suction rolls, Tail Breaker, Tail Cutters, Technical service, Thickeners, Topformers, Training Courses, Tunnel dryers, Twin wire formers, Unwinders, Vapour hoods, Ventilation equipments, Waste disposal plants, Waste paper preparation systems, Winders, Winders revamping, Winding shafts, Yankee cylinders, Yankee hoods .
